Advantage Auto Repair

Complete Auto Repair Services: Tune Up, Brakes, Clutch, Engine, Transmission, AC, Electrical, Emergency & All Repairs, New & Used Tires English Spanish

Store Hours

  • SUNClosed
  • MON8:AM - 5:30PM
  • TUES8:AM - 5:30PM
  • WED8:AM - 5:30PM
  • THUR8:AM - 5:30PM
  • FRI8:AM - 5:30PM
  • SAT8:AM - 4:00PM

Advantage Auto Repair
3155 N. Stone Ave.
(Intersection of Ft. Lowell and Stone Ave.)
Tucson, AZ 85705

Associations

BBB

ASE

iATN

Be Car Aware

Automotive Repair Blog

August 2018

Back to Blog Index


The Advantage Auto Repair & Transmisson Basic Guide To Synthetic Oil

Posted: Aug 26, 2018

Synthetic motor oil has been around for a long time, and more and more new vehicles are leaving factories with synthetic in their engines. But a lot of drivers don't really know much about it.

Let's start with conventional oil – the kind folks are used to. Conventional oil is made up of naturally occurring hydrocarbon chains, which means its molecules are long and have various lengths. Like a pile of pencils, some of them new and some of them used.

Synthetic oil is man-made. Its molecules are more uniform and regular in shape – more similar to marbles than pencils. Some synthetic oil starts with a petroleum base that's modified and others are entirely synthesized from other materials.

Synthetic motor oil works better in both hot and cold temperatures. It's more chemically stable so it doesn't readily evaporate or break down in the high heat produced inside your vehicle engine. This means it resists turning to sludge, which is a real engine killer.

Remember that marbles and pencils thing we were talking about? Well, that makes synthetic oil slipperier than conventional oil which means less friction in your engine. Your vehicle engine runs cooler, wears less and lasts longer. You also get a boost in power and maybe even an improvement in fuel economy.

Synthetic oil also lasts longer so you change it less often – which is great for the environment. With longer oil change intervals, you need an oil filter specifically built for the longer service life of synthetic oil. Talk with your friendly and knowledgeable Advantage Auto Repair & Transmisson service adviser about synthetic oil and synthetic blends – they might be just what you need to improve engine performance and extend the life of your vehicle.

Give us a call.

Advantage Auto Repair & Transmisson
3155 N. Stone Ave.
Tucson, AZ 85705
520.807.5555
http://www.advantage-autorepair.com

The Right Fluids for Your Vehicle

Posted: Aug 19, 2018

The current vehicles in the market have over a century of engineering behind them. They have evolved into complex and powerful machines. Developments in their engines, however, have coincided with advances in many other vehicle components, including the fluids.

It's up to people in Tucson to always use the right type of fluid for their vehicle. Your service advisor and your owner's manual are resources for auto advice on exactly what types of fluid your vehicle needs. Improper fluids can damage your vehicle and void your warranty.

Some of the fluids that have changed significantly in recent years are cooling system fluid, brake fluid, transmission fluid and motor oil. Each of these comes in many varieties now, and it's hard to know exactly which one your vehicle needs.

Cooling systems were once made of iron, steel and rubber. One coolant could be used to protect all of these materials. But new cooling systems have components made from a variety of metal alloys and several kinds of plastic, and coolants now contain additives that protect these various materials from corrosion. Since the materials vary among manufacturers, they require different additives, which means there are now several coolants on the market. The type of coolant your vehicle needs depends on the materials used in its cooling system.

Most vehicles used to require DOT 3 brake fluid. But now many vehicles need DOT 4 or DOT 5. Some Tucson drivers mistakenly think the higher numbers reflect an increase in grade—that DOT 4 is somehow better than DOT 3. But the truth is, the numbers represent variations in formulation. The different formulas have evolved to meet the demands of newer and better brake systems. For a long time, transmission fluid came in two varieties: regular and friction-modified. But transmissions have come a long way recently and so have the fluids that protect and lubricate them. There are several new types of fluid on the market, but your vehicle is designed for just one of them.

Of all the automotive fluids, motor oils have experienced perhaps the greatest advances in engineering and technology. A number of new weights and formulations have recently been developed to meet the needs of modern engines, which have more parts and tighter tolerances than ever before. Engines have become more sophisticated and complicated, but they have also increased in power and fuel efficiency. Despite these changes, Tucson vehicles still need them to be highly durable.

That's the job of motor oil. Motor oil still has to perform its original function—lubricating and protecting the engine. It is formulated to help clean the engine as well. Modern motor oil also has to be thin enough to penetrate small engine passages yet still be resistant to vaporization.

Specialized motor oils have also been developed for high-mileage vehicles. If your vehicle has 75,000 miles/120,000 km or more on it, you might consider switching to one of these motor oils. They contain extra detergents that help clean older engines, additives that condition seals and gaskets that can become brittle with age. High-mileage motor oils come in weights and types just like regular motor oils, and Tucson drivers should match the proper weight and type of high-mileage oil to their vehicle in the same way you would regular motor oil.

Over time, vehicles have developed in complexity and variety, and their fluids have developed as well. Each vehicle is matched to a set of fluids that meet its specific requirements. AZ vehicle owners should take care to learn their vehicle's fluid requirements before topping off at home. A large part of preventive maintenance for Tucson drivers is making sure your vehicle's fluids are clean and adequate, but they must be the proper type as well. As our vehicles become more sophisticated, car care becomes more sophisticated as well.

Learning about proper fluids for your vehicle will help you maintain its performance and prolong its life. Talk to us at Advantage Auto Repair & Transmisson in Tucson.

 Advantage Auto Repair & Transmisson
3155 N. Stone Ave.
Tucson, AZ 85705
520.807.5555
http://www.advantage-autorepair.com

 


Positive Crankcase Ventilation – PCV Valve Service at Advantage Auto Repair & Transmisson

Posted: Aug 12, 2018

Hello Tucson! Did you know that the first federally-mandated emissions control device was introduced in the 1960's? The Positive Crankcase Ventilation valve, or PCV valve, has been installed in AZ vehicles since 1964 and represents the first legislation by the United States government to regulate harmful emissions as well as to improve performance in the country's vehicles.

The PCV valve, as you can probably guess, is located on the crankcase. The crankcase is the lowest part of a vehicle's engine. It houses the crankshaft and the engine oil. The crankshaft connects to the pistons that power the engine.

Pistons are pushed down when fuel is burned in an engine. This causes the crankshaft to rotate, which sends power to the transmission.  It ultimately turns the axles and causes the vehicle to move. Some of the gases released by the burning fuel squeeze around the pistons and down into the crankcase.

If the escaped gases mix with the engine oil in the crankcase, oil sludge develops. This sludge has the consistency of petroleum jelly and can cause damage by clogging up passageways in the engine. Further, escaped gases can build up pressure inside the crankcase that can blow out seals and gaskets.

Before 1964, a hose was attached to the crankcase that vented escaped gases out into the air. These gases contained about 70% unburned fuel as well as harmful emissions. The PCV valve was designed to curb these harmful emissions as well as recapture unburned fuel.

The PCV valve is a small, one-way valve that allows escaped gases to exit the crankcase. The gases are then routed into the intake system so they can be re-burned in the engine. Fresh air enters the crankcase through a breather tube to facilitate this circulation and keep the air in the crankcase clean.

The PCV valve, like most working parts on a vehicle, will wear out over time. Usually it simply gets gummed up. Preventive maintenance, including routine oil changes at Advantage Auto Repair & Transmisson in Tucson, will extend the life of the valve, but eventually it will have to be replaced. A sticking PCV valve won't allow gases to circulate properly, which can increase pressure in the crankcase. Over time, that pressure will lead to oil leaks.

Your vehicle manufacturer recommends that a PCV valve be replaced every 20,000 to 50,000 miles (32,000 to 80,000 kilometers), depending on the vehicle and Tucson driving conditions. It's an inexpensive repair but may not be included in the maintenance schedule in your owner's manual.  So if you're looking for auto advice about the PCV valve, you may have to ask our pros at Advantage Auto Repair & Transmisson.

Taking care of our PCV valve protects the environment in AZ and improves vehicle performance. It's just part of good vehicle care for Tucson drivers and a way all of us can do our part to improve the world we live in.

Advantage Auto Repair & Transmisson
3155 N. Stone Ave.
Tucson, AZ 85705
520.807.5555
http://www.advantage-autorepair.com


Automotive Tips from Advantage Auto Repair & Transmisson: Air Conditioning Inspection

Posted: Aug 07, 2018

Most auto manufacturers recommend an interval for an air conditioning system inspection. The inspection uncovers leaks, worn hoses and assesses the condition of the other components.

Environmental laws in some around Tucson require leaks to be repaired before refrigerant can be added. Also some parts manufacturers require other components to be replaced along with certain failed parts in order to maintain the new part warranty. This is because a given failure may be the result of another worn or damaged part that will, if not replaced, prematurely damage the new component.

Advantage Auto Repair & Transmisson in Tucson is fully equipped to restore your flow of cool air.


Advantage Auto Repair & Transmisson
3155 N. Stone Ave.
Tucson, AZ 85705
520.807.5555
http://www.advantage-autorepair.com

 


Reviews

Best Auto
Repair Shops
in Tucson
2016
Coupons

Car Tips

We Accept

Financing


Apply Now
Easy Pay
Simple Finance
Simple Finance